KU SG 2.45 - 25 A - Signal generator
2450 MHz • 25 W
- Compact
- Excellent robustness using protection circuitry
- All-purpose module
The KU SG 2.45 - 25 A is a fixed frequency Signal Generator at 2450 MHz with a maximum output power of 25 W. The power level is adjustable between 1 W and 25 W. An isolator at the output protects the Signal Generator against high VSWR. The PLL stabilized oscillator provides low phase noise. Typical applications for the Signal Generator are electromagnetic wave propagation tests, microwave heating and EMC (electromagnetic compatibility) tests.
ISM band microwave heating plasma generation PECVD UV lighting
- Compact
- Excellent robustness using protection circuitry
- All-purpose module
The KU SG 2.45 - 25 A is a fixed frequency Signal Generator at 2450 MHz with a maximum output power of 25 W. The power level is adjustable between 1 W and 25 W. An isolator at the output protects the Signal Generator against high VSWR. The PLL stabilized oscillator provides low phase noise. Typical applications for the Signal Generator are electromagnetic wave propagation tests, microwave heating and EMC (electromagnetic compatibility) tests.
| Frequency range | 2450 MHz |
| Frequency accuracy | +/- 10 kHz |
| Phase noise @ 100 kHz | typ. -100 dBc/Hz |
| Harmonic rejection | min. 50 dB |
| ON Voltage | +5 ... 14 V DC |
| Operating case temp. range | -20 ... + 55 °C |
| Output power | 1 ... 25 W (adjustable) |
| Protection functions | isolator |
| Supply Voltage | +12 ... 26 V DC |
| Power consumption | typ. 80 W @ 25 W out |
| Output / impedance | SMA-female / 50 ohms |
| Case | milled aluminium |
| Dimensions | 178 x 59 x 21 |
| Weight | 300 g (typ.) |
- Power adjustable with external DC voltage or with internal potentiometer to set the power level
- Isolator for protection against high VSWR
- Reverse polarity protection
- Monitor outputs for forward and reverse power detection (DC voltage)
- Logic ON / OFF control
- Electromagnetic wave propagation tests
- Microwave heating
- EMC (electromagnetic compatibility) tests
- Plasma equipment
Please notice the following:
- The recommended combination of heat sink and fan(s) is only specified for an ambient temperature of 25 °C.
- Further information about dimensioning of heat sinks is available on our FAQ site.
