KU PA 9501100-2 A, GaAs-FET Leistungsverstärker

KU PA 9501100-2 A, GaAs-FET Power Amplifier

9500 ... 11000 MHz • 2 W
Frequency range9500..11000 MHz
Input power for P1dBtyp. 10 dBm
Maximum input power+15 dBm
Output power P1dBtyp. 32.3dBm, min. 31.1dBm (CW) (9500...10500MHz)
min. 30.8 dBm (CW) (10500...11000MHz)
Output power P1dBtyp. 1.7 W, min. 1.3 W (CW) (9500...10500MHz)
min. 1.2 W (CW) (10500...11000MHz)
Output power P3dBtyp. 33 dBm, min. 32.5 dBm (CW)
Output power P3dBtyp. 2 W, min. 1.8 W (CW)
Output power COFDM (1)typ. 27.8 dBm, min. 26 dBm
typ. 0.6 W, min. 0.4 W
Gain (small signal)typ. 25 dB
Gain flatness (small signal)typ. +/- 2 dB
Harmonic rejection min. 50 dB @ 31.7 dBm
IM3 (2)min. 40 dBc @ 27.8 dBm PEP
Efficiency typ. 8 %, min. 7 % @ 33 dBm
Supply voltage+12 ... 14 V DC
Current consumption @ P1dBtyp. 2 A
Forward detectionyes (diode detector)
Operating case temp. range-20 ... +55 °C
VSWR of loadmax. 1.8 : 1
Input connector / impedanceSMA-female / 50 ohms
Output connector / impedanceSMA-female / 50 ohms
Casemilled aluminium
Dimensions (mm)80 x 60 x 20
Weight150 g (typ.)
(1)Measured with QAM 64, single carrier, EVM: 2%
(2)Measured 2-tone, frequency spacing: 1 MHz
  • GaAs FET technology
  • High linearity
  • Good harmonic rejection
  • High bandwidth
  • Reverse polarity protection
  • Monitor output for forward power detection (DC voltage)
  • Small mechanical dimensions
  • Digital broadcast systems (DVB-T, DVB-S)
  • COFDM systems using modulation types QPSK, QAM
  • Analog transmission systems
Please notice the following:
  • The technical specifications refer to room temperature.
  • The power amplifier doesn’t contain any coaxial relays.
  • The recommended combination of heat sink and fan(s) is only specified for an ambient temperature of 25 °C.
  • Further information about dimensioning of heat sinks is available on our FAQ site.

Accessories

References