KU PA 2325 BLK
Power Amplifier
2300 ... 2450 MHz • 20 W
| Specifications | |
| Type | KU PA 2325 BLK |
| Frequency range | 2300 ... 2450 MHz |
| Input power | typ. 15 mW |
| Output power P1dB | min. 20 W |
| Saturation power | typ. 25 ... 30 W (CW) |
| Gain | typ. 31 dB |
| IM3 @ 10 W PEP | typ. -47 dBc |
| ON voltage | +5 ... 14 V DC (ON) |
| VSWR of load | max. 1.8:1 |
| Maximum case temperature | +55 °C |
| Supply voltage | +11 ... 14 V DC |
| Current consumption | typ. 7.5 A |
| Input connector / impedance | SMA-female, 50 ohms |
| Output connector / impedance | SMA-female, 50 ohms |
| Case | milled aluminium |
| Dimensions (mm) | 178 x 60 x 20 |
| Weight | typ. 340 g |
Features
- GaAs FET technology
- High linearity (class A operation)
- Over voltage protection and reverse polarity protection
- Monitor output for forward power detection (DC voltage)
- Single DC supply 11 ... 14 V DC
- ON / OFF control with DC voltage (ON at +5 ... 14 V)
Applications
- Multichannel Multipoint Distribution Service (MMDS)
- Analog and digital transmission systems
- Amateur Radio
- With reduced power suitable for DATV
Options
- Amplifier mounted on heat sink with fans
Accessories
- Recommended power supply: SP 150 W 12
- Recommended heat sink: SK 200 - 80 1)
- Recommended fan: FAN 80x80 12 V 1)
- Thermal cut-out thermostat TS-65/10
You will find further information for dimensioning heat sinks under the rubric heat sinks.
1) Dimensioned for 25 °C ambient temperature
Important note
- Module does not contain coaxial relay!
- Alle Angaben ohne Gewähr -
