KU LNC 25 TM
Down Converter
2350 ... 2550 MHz
| Specifications | |
| Type | KU LNC 25 TM |
| Frequency range | 2350 ... 2550 MHz |
| IF frequency | 1433.5 ... 1633.5 MHz |
| Frequency stability | +/- 20 kHz |
| Gain | 40 dB |
| Noise figure | 0.7 dB |
| LO frequency | 916.5 (SAW) |
| Supply voltage | +9 ... 18 V DC |
| Current consumption | typ. 70 mA |
| Output connector / impedance | F-female, 75 ohms |
| Input connector / impedance | N-female, 50 ohms |
| Dimensions (mm) | 109 x 84 x 59 |
| Case | Water resistant |
Features
- Low noise converter for conversion of the 2.4 GHz TV radio link band to the SAT receiver range 1.433 ...1.633 MHz
- Low noise figure and high gain
- Use of the most advanced GaAs HEMT FET`s
- It was possible by using 2 „Multilayered Ceramic Bandfilters“ for optimum bandselection at 2.4 GHz, as well as Schottky dioden mixer for a high dynamic range
- Unconditionally stable. No parasitic oscillators in case of poor antenna match or by using filter - diplexer at relais radio stations
Applications
- The converter is suitable for all kinds of digital TV-modulation like DVBS - DVBT - COFDM - QPSK because of the high linearity and the good frequency stability (typ. +/- 20 kHz) and phase noise (only 115 dBc/Hz @ 10 kHz) of the SAW-oscillator
- Alle Angaben ohne Gewähr -
