MKU PA 2M-60W HY
VHF MOSFET Power Amplifier
144 ... 146 MHz • 60 W
| Specifications | |
| Type | MKU PA 2M-60W HY |
| Frequency range | 144 ... 146 MHz |
| Input power | typ. 50 mW |
| Output power Psat | typ. 60 W (CW) |
| Harmonic rejection | typ. 60 dB |
| VSWR of load | max. 1.8:1 |
| Maximum case temperature | +55 °C |
| Supply voltage | +12 ... 14 V DC |
| Current consumption | max. 12 A |
| Quiescent current | typ. 4 A |
| Input connector / impedance | SMA-female, 50 ohms |
| Output connector / impedance | N-female, 50 ohms |
| Case | milled aluminium |
| Dimensions (mm) | 130 x 60 x 20 |
| Weight | typ. 270 g |
Block diagram
Features
- Good linearity
- Built-in low pass filter for good harmonic rejection
- Over voltage protection and reverse polarity protection
- Monitor outputs for forward and reverse power detection
Applications
- Analog and digital transmission systems
- Power amplifier for radio amateur applications (SSB, CW)
Options
- Amplifier mounted on heat sink with fans
Accessories
- Recommended power supply: SP 150 W 12
- Recommended heat sink: SK 150 - 62 1)
- Recommended fan: FAN 60x60 HP 12 V 1)
Alternative:
- Recommended heat sink: SK 300 - 62 1)
- Recommended fan: FAN 60x60 12 V 1)
You will find further information for dimensioning heat sinks under the rubric heat sinks.
1) Dimensioned for 25 °C ambient temperature
Important notes
- Recommended output power for radio amateur applications:
Modulation type: CW/FM up to 60 W, SSB up to 20 W - Amplifier does not contain coaxial relais!
Industrial use of power amplifiers for Amateur Radio
Our power amplifiers of the MKU-series are exclusively intended for amateur radio applications and will only be sold to radio amateurs with a licence. These products are specified for amateur radio requirements and are not designed for industrial applications. Please notice our list of industrial products or ask for a special version.
- Alle Angaben ohne Gewähr -
