MKU PA 13CM-20W A
Linear Power Amplifier
2300 ... 2400 MHz • 20 W
| Specifications | |
| Type | MKU PA 13CM-20W A |
| Frequency range | 2300 ... 2400 MHz |
| Input power | typ. 1,5 W, max. 2,5 W |
| Output power Psat | min. 25 W |
| Gain | typ. 13 dB |
| Harmonic rejection @ 20 W | min. 40 dB |
| ON voltage | +5 ... 14 V DC (ON) |
| VSWR of load | max. 1.8:1 |
| Maximum case temperature | +55 °C |
| Supply voltage | +12 ... 14 V DC |
| Current consumption | typ. 5 A |
| Quiescent current | typ. 0.9 A |
| Input connector / impedance | SMA-female, 50 ohms |
| Output connector / impedance | SMA-female, 50 ohms |
| Case | milled aluminium |
| Dimensions (mm) | 80 x 60 x 20 |
| Weight | typ. 150 g |
Features
- GaAs FET technology
- High linearity
- Over voltage protection and reverse polarity protection
- Monitor output for forward power detection (DC voltage)
- Logic ON / OFF control (ON at 5 … 14 V)
Applications
- Amateur Radio
- Analog and digital operation modes (SSB, CW, ATV, DATV)
- With reduced power suitable for DATV (digital amateur television)
- Digital broadcast systems (DVB-T, DVB-S)
- Analog and digital transmission systems
Options
- Amplifier mounted on heat sink with fans
Accessories
- Recommended power supply: SP 150 W 12
- Recommended heat sink: SK 150 - 62 1)
Heat-Conductive Paste Arctic Silver 5 - Recommended fan: FAN 60x60 12 V 1)
- Thermal cut-out thermostat TS-65/10
You will find further information for dimensioning heat sinks under the rubric heat sinks.
1) Dimensioned for 25 °C ambient temperature
Important note
- Module does not contain coaxial relay!
Industrial use of power amplifiers for Amateur Radio
Our power amplifiers of the MKU-series are exclusively intended for amateur radio applications and will only be sold to radio amateurs with a licence. These products are specified for amateur radio requirements and are not designed for industrial applications. Please notice our list of industrial products or ask for a special version.
- Alle Angaben ohne Gewähr -
