MKU LNA 473 A
Super Low Noise Amplifier
47000 ... 47250 MHz
With this new developed amplifier based on the 0.15µ pHEMT technology the combination of very low noise figure and a high output power in one product has been achieved. This amplifier is suitable for receiving and transmitting as well. By using a waveguide transfer switch or a rotate mechanism this amplifier can be implemented in a transverter which will increase the transmit and receive performance drastically.
To reduce losses to a minimum the board is coupled directly to the waveguide input. The small mechnical dimensions allow the construction of very tight transmit and receive systems.
| Specifications | |
| Type | MKU LNA 473 A |
| Frequency range | 47000 ... 47250 MHz |
| Noise figure @ 18 °C | max. 5.0 dB |
| Gain | min. 25 dB |
| Maximum RF input power | 2 mW |
| Saturation output power | typ. 150 mW |
| Supply voltage | +9 ... 13 V DC |
| Current consumption | typ. 400 ... 900 mA |
| Input connector | Waveguide R500 / WR19 / WG24 with M2 thread |
| Output connector | Waveguide R500 / WR19 / WG24 with M2 thread |
| Case | milled aluminium / brass |
| Dimensions (mm) | 56 x 30 x 20 |
| Weight | typ. 110 g |
Features
- Low noise figure
- High output power
- Unconditionally stable - no parasitic oscillations in case of poor antenna match
- Simple supply voltage handling
- Small mechanical dimensions
- Suitable as preamplifier and as power amplifier
Accessories
Important note
- Amplifier does not contain a coaxial relay!
- Maximum input power 2 mW
- Specifications subject to change without notice -
