MKU LNA 232 A2 TM
Super Low Noise Preamplifier with ceramic filter and notch filter
2350 MHz
| Specifications | |
| Type | MKU LNA 232 A2 TM |
| Center frequency | 2320 ... 2380 MHz |
| Noise figure @ 18 °C | 0.7 dB |
| Gain | min. 35 dB |
| Maximum RF input power | 1 mW |
| Supply voltage | +9 ... 18 V DC |
| Current consumption | typ. 30 mA |
| Input / impedance | N-female / 50 ohms |
| Output connector / impedance | N-female / 50 ohms |
| Case | German silver, installed into a water resistant case incl. V2A mounting clamp for antenna masts with 25 ... 60 mm diameter |
| Dimensions (mm) | 109 x 85 x 60 |
| Weight | typ. 390 g |
Features
- Notch filter for 1250 MHz at input - for duplex operation on 1.3 GHz (TX) and 2.3 GHz (RX)
- Multilayer ceramic for good selectivity
- Low noise figure
- Unconditionally stable - no parasitic oscillations in case of poor antenna match
- Built-in bias tee for remote power supply via coaxial cable
- Additional solder pin for direct DC power supply
Important note
- The preamplifier does not contain built-in coaxial relays!
- Maximum input power 1 mW
- Specifications subject to change without notice -
