KU LNA BB 0515 B-N
Low Noise Broadband Amplifier
5 ... 1500 MHz
This super low noise wideband amplifier was designed to cover the 5 ... 1500 MHz frequency range. The noise figure is typ. 1.2 dB at 20 dB gain. Simultaneously the broadband amplifier has a high IP 3 and a output power of > 100 mW. With this outstanding performences, this amplifier may be used for many applications. The amplifier is coupled via a high pass filter for suppressing frequencies below 5 MHz.
| Specifications | |
| Type | KU LNA BB 0515 B-N |
| Frequency range | 5 ... 1500 MHz |
| Noise figure @ 18 °C | typ. 1.2 dB, max. 2.0 dB (30 ... 1500 MHz) |
| Gain | typ. 20 dB, min. 17 dB @ 1500 MHz |
| Input power | max. +12 dBm |
| Output power P1dB | typ. 21 dBm |
| Output IP3 @ 20 MHz | 33 dBm |
| Output IP3 @ 100 ... 1500 MHz | min. 33 dBm |
| Input return loss (S11) | typ. 6 dB |
| Supply voltage | +12 ... 14 V DC |
| Current consumption | typ. 120 mA |
| Input connector / impedance | N-female, 50 ohms |
| Output connector / impedance | N-female, 50 ohms |
| Case | milled aluminium |
| Dimensions (mm) | 50 x 30 x 17 |
| Weight | typ. 85 g |
Frequency response (diagram)
Features
- High IP3
- Large bandwidth
- Reverse polarity protection
- Solder pin for direct power supply
- Small mechanical dimensions
Applications
- Measurement and laboratory equipment
- Broadband amplifier for spectrumanalysis
- Low noise broadband amplifier for watchingsystems
- Broadband power amplifier for networkanalysis (sweep oscillators)
- Suitable for large signal environments
- CATV Distribution amplifier
Options
- Remote power supply via output connector
Important notes
- Amplifier does not contain a coaxial relay!
- Maximum input power +12 dBm
- Specifications subject to change without notice -
