MKU PA 1301 A
Linear Power Amplifier for the 23 cm Band
1240 ... 1300 MHz • 1 W
This amplifier with an output power of 1 watt is suitable as driver amplifier or for low power applications. Because of the small mechanical dimensions of the milled aluminium case, it is easy to integrate into compact systems.
| Specifications | |
| Type | MKU PA 1301 A |
| Frequency range | 1240 ... 1300 MHz |
| Input power | 50 mW, max. 50 mW |
| Output power | 1 W |
| Input return loss (S11) | min. 6 dB |
| VSWR of load | max. 1.8:1 |
| Maximum case temperature | +55 °C |
| Supply voltage | +12 ... 14 V DC |
| Current consumption | max. 0.45 |
| Quiescent current | typ. 0.3 A |
| Input connector / impedance | SMA-female, 50 ohms |
| Output connector / impedance | SMA-female, 50 ohms |
| Case | milled aluminium |
| Dimensions (mm) | 50 x 30 x 22 |
| Weight | typ. 65 g |
Features
- High linearity (class A operation)
- Reverse polarity protection
- Milled aluminium case
- Small mechanical dimensions
Applications
- Low power applications
- Driver amplifier
- Analog and digital transmission systems
Options
- Amplifier mounted on heat sink with fans
Accessories
You will find further information for dimensioning heat sinks under the rubric heat sinks.
1) Dimensioned for 25 °C ambient temperature
Important note
- Amplifier does not contain coaxial relais!
- Specifications subject to change without notice -
