MKU PA 3CM-8W A
Linear Power Amplifier for 10 GHz
10300 ... 10400 MHz • 8 W
| Specifications | |
| Type | MKU PA 3CM-8W A |
| Frequency range | 10300 ... 10400 MHz |
| Input power | typ. 200 mW, max. 300 mW |
| Output power Psat | min. 10 W |
| Gain | typ. 17 dB |
| Maximum case temperature | +55 °C |
| VSWR of load | max. 1.8:1 |
| Supply voltage | +12 ... 14 V DC |
| Current consumption | typ. 4 A |
| Input connector / impedance | SMA-female, 50 ohms |
| Output connector / impedance | SMA-female, 50 ohms |
| Case | milled aluminium |
| Dimensions (mm) | 130 x 60 x 20 |
| Weight | typ. 250 g |
Features
- GaAs FET technology
- High linearity (class A operation)
- Detector output (DC voltage) for monitoring forward output power
- Surge protection and reverse polarity protection
- Small mechanical dimensions
Applications
- Analog and digital transmission systems
Options
- Amplifier mounted on heat sink with fans
- Other frequencies on request
Accessories
- Recommended heat sink: SK 150 - 62 1)
Heat-Conductive Paste Arctic Silver 5 - Recommended fan: FAN 60x60 12 V 1)
You will find further information for dimensioning heat sinks under the rubric heat sinks.
1) Dimensioned for 25 °C ambient temperature
Important note
- Amplifier does not contain coaxial relais!
Industrial use of power amplifiers for Amateur Radio
Our power amplifiers of the MKU-series are exclusively intended for amateur radio applications and will only be sold to radio amateurs with a licence. These products are specified for amateur radio requirements and are not designed for industrial applications. Please notice our list of industrial products or ask for a special version.
- Alle Angaben ohne Gewähr -
