MKU 10 G3
Transverter
10368 ... 10370 MHz
The new design of our transverter for 10 GHz features better performance and many new functions.
Now, an external 10 MHz reference frequency can be connected to achieve highest frequency accuracy. This is necessary for EME, WSJT and Tropo DX. The frequency of 10 MHz can be supplied by a highly stable OCXO, a reference oscillator of a frequency counter, a rubidium frequency standard or a GPS controlled frequency source.
If a 10 MHz reference frequency is not available, the internal crystal oscillator of the transverter can be used. This crystal oscillator is frequency stabilized by our 40 °C precision crystal heater QH40A.
A bigger attenuator at the IF input port allows an input power of up to 5 watts. Self-resettable polyfuses prevent damages of the transverter module, especially if it is used in a portable station. Of course, all the well-tried functions of the old transverter version are kept in the new design!
The small mechanical dimensions of the transverter, which is designed in SMD technology, allow the construction of a small portable station as well as a powerful home station.
| Specifications | |
| Type | MKU 10 G3 |
| Frequency range (RF) | 10368 ... 10370 MHz |
| Frequency range (IF) | 144 ... 146 MHz |
| LO accuracy @ 18 °C | typ. +/- 2 ppm, max. +/- 3 ppm (without 10 MHz reference frequency |
| LO frequency stability (0 ... +40 °C) | typ. +/- 2 ppm, max. +/- 3 ppm (without 10 MHz reference frequency) |
| IF input power | max. 5 W, adjustable (0.5 ... 5 W) |
| RX gain | min. 20 dB, adjustable |
| Noise figure @ 18 °C | typ. 1.2 dB |
| TX output power | min. 200 mW |
| Spurious rejection | min. 40 dB, typ. 50 dB |
| Harmonic rejection | typ. 30 dB |
| External reference input | 10 MHz / 2 ... 10 mW (sine or square wave) |
| PTT input | via IF-cable or contact to ground |
| 12 V - Output | for antenna relay and PA, max. 0.6 A |
| Monitor output | output power monitoring typ. +1.2 V out |
| Supply voltage | +12 ... 14 V DC |
| Current consumption | typ. 350 mA |
| Dimensions (mm) | 150 x 55 x 30 |
| Coaxial connectors / impedance | SMA-female / 50 ohms |
| Weight | typ. 220 g |
Block diagram
Different system versions
Features
New features of the transverter MKU 10 G3
- Additional input for 10 MHz reference frequency
- Internal stabilized oscillator with precision crystal heater (can be used instead of 10 MHz reference frequency)
- Bigger attenuator at the IF input for input power up to 5 watts
- Fuses are self-resettable (polyfuses)
Well-tried functions and features - based on MKU 10 G2
- Super low noise converter in the receive path
- Transmit gain and receive gain separately adjustable
- Control output for additional amplifier stages or a coaxial relay
- PTT can be switched by voltage on the IF connector or by connecting the PTT pin to ground
- Detector output (DC voltage) for monitoring the output power
Applications
Options
- Professional: Transverter available in milled aluminium case
- Dimensions as PDF
- JA: Transverter version for Japan / Frequency: 10450 ... 10452 MHz / IF: 432 ... 434 MHz
Accessories
- As a 10 MHz frequency source we recommend the GPS-stabilized oscillator by James Miller, G3RUH or the 10 MHz GPS-Frequency Standard by ID Elektronik, DK2DB
- GPS stabilized 10 MHz oscillator (James Miller, G3RUH)
- 10 MHz GPS-Frequency Standard (ID Elektronik, DK2DB)
References
- Specifications subject to change without notice -
