KU SG 2.45 - 30 A
Signal Generator
2450 MHz • 30 W
The KU SG 2.45 30 A is a fixed frequency Signal Generator at 2450 MHz with a maximum output power of 30 W. The power level is adjustable between 2 W and 30 W. An isolator at the output protects the Signal Generator against high VSWR. The PLL stabilized oscillator provides low phase noise. Typical applications for the Signal Generator are electromagnetic wave propagation tests, microwave heating and EMC (electromagnetic compatibility) tests.
| Specifications | |
| Type | KU SG 2.45 - 30 A |
| Frequency | 2450 MHz |
| Frequency tolerance | +/- 10 kHz |
| Phase noise @ 100 kHz | typ. -104 dBc/Hz |
| Output power | 2 ... 30 W (ajdustable) |
| Harmonic rejection | min. 50 dB |
| ON voltage | +5 ... 14 V DC |
| VSWR protection | isolator |
| Maximum case temperature | +55 °C |
| Supply voltage | +11 ... 14 V DC |
| Current consumption | typ. 8 A |
| Output connector | SMA-female / 50 ohms |
| Case | milled aluminium |
| Dimensions (mm) | 212 x 63 x 22 |
| Weight | typ. 500 g |
Block diagram
Features
- Power adjustable with DC voltage
- Isolator for protection against high VSWR
- Over voltage protection and reverse polarity protection
- Monitor outputs for forward and reverse power detection (DC voltage)
- Logic ON / OFF control
Applications
- Electromagnetic wave propagation tests
- Microwave heating
- EMC (electromagnetic compatibility) tests
Options
- Signal generator mounted on heat sink with fans
- Internal potentiometer to set the power level (instead of DC voltage adjust)
- Other frequencies
- More power
Accessories
- Recommended power supply: SP 150 W 12
- Recommended heat sink: SK 300 - 62 1)
- Recommended fan: 2x FAN 60x60 12 V 1)
1) Dimensioned for 25 °C ambient temperature
- Specifications subject to change without notice -
