MKU PA 3410 A
Power Amplifier
3400 ... 3600 MHz • 10 W
The power amplifier is developed both for digital and analog transmission systems. The wide frequency range covers as well the WIMAX-band as the amateur radio band equally. By the use of LD-MOSFET-technology high effency and low current consumption are reached at the same time.
Specifications | |
Type | MKU PA 3410 A |
Frequency range | 3400 ... 3600 MHz |
Input power for P1dB | typ. 200 mW |
Output power P1dB | typ. 9 W (CW) |
Saturation power | typ. 14 W (CW) |
Output power COFDM 1) | typ. 2 W |
Gain | typ. 18 dB |
Gain flatness | typ. +/- 0.5 dB |
Monitor output | DC voltage, uncalibrated |
Efficiency | min. 37 % @ P1dB |
Harmonic rejection | min. 37 dB @ 10 W |
Intermodulation distrtotions | |
IM3 @ 2 W PEP | typ. -41 dBc |
IM3 @ 5 W PEP | typ. -31 dBc |
Supply voltage | +28 V DC |
ON voltage (ON) | +9 ... 14 V DC |
Maximum load VSWR | 1.8:1 |
Maximum case temperature | +55 °C |
Quiescent | typ. 160 mA |
Current consumption | max. 1.4 A |
Input connector / impedance | SMA-female, 50 ohms |
Output connector / imepdance | SMA-female, 50 ohms |
Case | milled aluminium |
Dimensions (mm) | 80 x 59 x 20 |
Weight | typ. 140 g |
1) measured with QAM64/8MSps | |
Features
- LD-MOSFET-technology
- High voltage and reverse polarity protection
- Monitor output for forward power detection (DC voltage)
- Milled aluminium case
Applications
- WIMAX radio systems
- COFDM – systems with modulation QPSK, QAM
- Amateur Radio
- Analog transmission systems
Options
- Amplifier mounted on heat sink with fans
Accessories
- Recommended power supply: SP 150 W 27
- Recommended heat sink: SK 150 - 62 1)
- Recommended fan: FAN 60x60 24 V 1)
You will find further information for dimensioning heat sinks under the rubric heat sinks.
1) Dimensioned for 25 °C ambient temperature
Important note
- Amplifier does not contain coaxial relais!
- Specifications subject to change without notice -
