MKU PA 233 XL
Power Amplifier
2300 ... 2400 MHz • 10 W
Special Offer!
399,- EUR
This series of power amplifiers for the 13cm band uses GaAs FETs. Due to its linearity the amplifier is usable for all analog and digital modes in amateur radio. Typical examples are SSB, CW, ATV and DATV (digital amateur television).
| Specifications | |
| Type | MKU PA 233 XL |
| Frequency range | 2300 ... 2400 MHz |
| Input power | typ. 50 mW |
| Output power | typ. 10 W |
| Supply voltage | +12 ... 14 V DC |
| VSWR of load | max. 1.8:1 |
| Current consumption | typ. 3.3 A |
| Input connector / impedance | SMA-female, 50 ohms |
| Output connector / impedance | SMA-female, 50 ohms |
| Case | milled aluminium |
| Dimensions (mm) | 130 x 60 x 20 |
| Weight | typ. 260 g |
Features
- Detector output (DC voltage) for monitoring forward output power
- Surge protection and reverse polarity protection
- Suitable for all analog and digital modes (SSB, CW, ATV, DATV)
Options
- Amplifier mounted on heat sink with fans
Accessories
- Recommended heat sink: SK 150 - 62 1)
- Recommended fan: FAN 60x60 12 V 1)
You will find further information for dimensioning heat sinks under the rubric heat sinks.
1) Dimensioned for 25 °C ambient temperature
Important note
- Module does not contain coaxial relay!
- Specifications subject to change without notice -
