MKU PA 232 HXL-2
Linear Power Amplifier
2300 ... 2400 MHz • 23 W
Specifications | |
Type | MKU PA 232 HXL-2 |
Frequency range | 2300 ... 2400 MHz |
Input power | typ. 80 mW, max. 150 mW |
Output power P1dB | min. 23 W |
Saturation power | min. 26 W |
Output power COFDM | typ. 2 ... 4 W |
Gain | typ. 25 dB |
Gain flatness | typ. +/- 0.5 dB |
Harmonic rejection @ 20 W | typ. 37 dB |
IM3 @ 10 W PEP | typ. -36 dBc |
IM3 @ 20 W PEP | typ. -33 dBc |
ON voltage | +5 ... 14 V DC (ON) |
Input return loss (S11) | min. 12 dB |
VSWR of load | max. 1.8:1 |
Maximum case temperature | +55 °C |
Supply voltage | +12 ... 14 V DC |
Current consumption | typ. 5 A |
Quiescent current | typ. 1.3 A |
Input connector / impedance | SMA-female, 50 ohms |
Output connector / impedance | SMA-female, 50 ohms |
Case | milled aluminium |
Dimensions (mm) | 130 x 60 x 20 |
Weight | typ. 250 g |
Features
- GaAs FET technology
- High linearity
- Over voltage protection and reverse polarity protection
- Monitor output for forward power detection (DC voltage)
- Logic ON / OFF control (ON at 5 … 14 V)
Applications
- Amateur Radio
- Analog and digital operation modes (SSB, CW, ATV, DATV)
- With reduced power suitable for DATV (digital amateur television)
- Digital broadcast systems (DVB-T, DVB-S)
- Analog and digital transmission systems
Options
- Amplifier mounted on heat sink with fans
Accessories
- Recommended power supply: S 150 W 12
- Recommended heat sink: SK 150 - 62 1)
- Recommended fan: FAN 60x60 12 V 1)
- Thermal cut-out thermostat TS-65/10
You will find further information for dimensioning heat sinks under the rubric heat sinks.
1) Dimensioned for 25 °C ambient temperature
Important note
- Module does not contain coaxial relay!
- Specifications subject to change without notice -
