MKU PA 1317-60 HY
VHF MOSFET Power Amplifier
130 ... 170 MHz • 60 W
Specifications | |
Type | MKU PA 1317-60 HY |
Frequency range | 130 ... 170 MHz |
Input power | typ. 50 mW |
Output power | typ. 60 W (CW) |
Output power P1dB | typ. 20 W (CW) |
Input return loss (S11) | typ. 20 dB |
Efficiency | typ. 45 % at 60 W (CW) |
Gain flatness | +/- 2 dB |
Harmonic rejeciton | typ. 60 dB |
IM3 @ 20 W PEP | typ. -29 dBc |
VSWR of load | max. 1.8:1 |
Maximum case temperature | +55 °C |
Supply voltage | +12 ... 14 V DC |
Current consumption | max. 12 A |
Quiescent current | typ. 4 A |
Input connector / impedance | SMA-female, 50 ohms |
Output connector / impedance | N-female, 50 ohms |
Case | milled aluminium |
Dimensions (mm) | 130 x 60 x 20 |
Weight | typ. 270 g |
Block diagram
Features
- Good linearity
- Built-in low pass filter for good harmonic rejection
- Over voltage protection and reverse polarity protection
- Monitor outputs for forward and reverse power detection
Applications
- Analog and digital transmission systems
- Power amplifier for radio amateur applications (SSB, CW)
Options
- Amplifier mounted on heat sink with fans
Accessories
- Recommended power supply: S 150 W 12
- Recommended heat sink: SK 150 - 62 1)
- Recommended fan: FAN 60x60 HP 12 V 1)
Alternative:
- Recommended heat sink: SK 300 - 62 1)
- Recommended fan: FAN 60x60 12 V 1)
You will find further information for dimensioning heat sinks under the rubric heat sinks.
1) Dimensioned for 25 °C ambient temperature
Important notes
- Recommended output power for radio amateur applications:
Modulation type: CW/FM up to 60 W, SSB up to 20 W - Amplifier does not contain coaxial relais!
- Specifications subject to change without notice -
