MKU PA 13100 B
Linear Power Amplifier for the 23 cm Band
1240 ... 1300 MHz • 100 W
Our high power amplifier for the 23 cm band is based on LDMOS technology. It provides high linearity, high efficiency and offers a wide range of analog and digital applications.
Specifications | |
Type | MKU PA 13100 B |
Frequency range | 1240 ... 1300 MHz |
Input power | 5 W, max. 10 W |
Output power | min. 100 W |
Saturation power | min. 120 W |
Harmonic rejection @ 100 W | typ. 39 dB |
IM3 @ 100 W PEP | typ. -27 dBc |
IM3 @ 30 W PEP | typ. -38 dBc |
Efficiency | typ. 40 % |
Input retrun loss (S11) | typ. 10 dB |
VSWR of load | max. 1.8:1 |
Maximum case temperature | +55 °C |
Monitor output | Yes |
Supply voltage | +26 V DC |
Current consumption | max. 14 A |
Quiescent current | typ. 2 A |
Input connector / impedance | SMA-female, 50 ohms |
Output connector / impedance | N-female, 50 ohms |
Case | milled aluminium |
Dimensions (mm) | 124 x 80 x 22 |
Weight | typ. 370 g |
Features
- LD MOSFET technology
- Monitor output for forward power detection (DC voltage)
- ON / OFF control with DC voltage
Applications
- Analog and digital transmission systems
Options
- Amplifier mounted on heat sink with fans
Accessories
- Recommended power supply: SP 320 W 24
- Recommended heat sink: SK 200 - 160 1)
- Recommended fan: 2 pieces FAN 80x80 HP 24 V 1)
- Circulator (VAM 1081) as a protection in case of bad antenna matching
You will find further information for dimensioning heat sinks under the rubric heat sinks.
1) Dimensioned for 25 °C ambient temperature
Important note
- Amplifier does not contain coaxial relais!
- Specifications subject to change without notice -
