KU PA BB 5030 A
Braodband Power Amplifier
50 ... 3000 MHz • 4 W
Specifications | |
Type | KU PA BB 5030 A |
Frequency range | 50 ... 3000 MHz |
Output power P1dB | min. 3 W (50 ... 1500 MHz) |
Saturation power | typ. 4 W (50 ... 1500 MHz) |
Gain | typ. 32 dB |
Noise figure @ 18 °C | max. 6 dB |
VSWR of load | max. 1.8:1 |
Maximum case temperature | +55 °C |
Supply voltage | +24 ... 26 V DC |
Current consumption | typ. 850 mA |
Input connector / impedance | SMA-female, 50 ohms |
Output connector / impedance | SMA-female, 50 ohms |
Case | milled aluminium |
Dimensions (mm) | 80 x 60 x 20 |
Weight | typ. 140 g |
Frequency response (diagram)
Features
- GaAs FET technology
- Large bandwidth
- High gain
- Over voltage protection and reverse polarity protection
- Monitor output for forward power detection (DC voltage)
- Milled aluminium case
- Small mechanical dimensions
Applications
- EMC measurement
- Additional power for standard signal generators
- Measurement and laboratory equipment
- Driver amplifier
Options
- Amplifier mounted on heat sink
Accessories
- Recommended heat sink: SK 120 - 75 1)
You will find further information for dimensioning heat sinks under the rubric heat sinks.
1) Dimensioned for 25 °C ambient temperature
Important note
- Module does not contain coaxial relay!
- Specifications subject to change without notice -
