KU PA BB 233 BBA
Broadband Power Amplifier
500 ... 2500 MHz • 1 W
This wideband amplifier was designed to cover the 0.5...2.5 GHz frequency range. It provides an output >1 watts with more than 30dB gain.This amplifier is fitted in a professional aluminium case. A monitor pin-enables the monitoring of the output and can be used for the output adjustment when measuring.
Specifications | |
Type | KU PA BB 233 BBA |
Frequency range | 500 ... 2500 MHz |
Output power | typ. 1 W |
Saturation power | typ. 3 W (2300 MHz) |
Gain | min. 30 dB |
Noise figure @ 18 °C | typ. 6 dB |
Maximum case temperature | +55 °C |
Supply voltage | +12 ... 14 V DC |
Current consumption | typ. 1.7 A |
Input connector / impedance | SMA-female, 50 ohms |
Output connector / impedance | SMA-female, 50 ohms |
Case | milled aluminium |
Dimensions (mm) | 130 x 60 x 20 |
Weight | typ. 250 g |
Features
- Over voltage protection and reverse polarity protection
- Monitor output for forward power detection (DC voltage)
Applications
- Test amplifier for high dynamic range applications
- Power amplifier for EMC measurment
- Power amplifier to increase the output level of standard signal generators or sweep signal generators
- Power amplifier for amateur radio bands. Output power typ. 3 watts on 13cm band (input power 5 mW)
Options
- Amplifier mounted on heat sink with fans
Accessories
- Recommended heat sink: SK 120 - 75 1)
You will find further information for dimensioning heat sinks under the rubric heat sinks.
1) Dimensioned for 25 °C ambient temperature
Important note
- Module does not contain coaxial relay!
- Specifications subject to change without notice -
