KU PA BB 00305-100 A

Power Amplifier

30 ... 550 MHz • 100 W

With the KU PA BB 00305-100 A Kuhne electronic puts a broadband power amplifier in the frequency range from 30 MHz to 550 MHz with an output power of minimum 100 W on the market. The amplifier can be used for EMC-tests, laboratory measurements and other applications. Because of its high gain the power amplifier can be connected to every common signal generator.

Preliminary data

Specifications

Type

KU PA BB 00305-100 A

Frequency range

30 ... 550 MHz

Input power

max. 8 dBm

Output power P1dB

typ. 60 W

Saturation power

min. 100 W

Output power COFDM @ 2 % EVM  1)   

typ. 11 W

Gain (small signal)

min. 48 dB

Gain flatness

typ. +/- 2 dB

Efficiency

typ. 50 %

Harmonic rejection @ 50 W

typ. 25 dB, min. 18 dB

Intermodulation distortions

IM3 @ 50 W PEP

min. 25 dBc

IM3 @ 100 W PEP

min. 20 dBc

ON voltage

9 - 14 V DC

Input return loss (S11)

min. 10 dB

Supply voltage

+28 V DC

Maximum load VSWR

1.8:1

Maximum case temperature

+55 °C

Quiescent current

typ. 4.4 A

Current consumption

max. 8.5 A

Input connector / impedance

SMA-female, 50 ohms

Output connector / impedance

N-female, 50 ohms

Case

milled aluminium

Dimensions (mm)

192 x 80 x 22

Weight

typ. 580 g

1) measured with QAM64/8MSps, single carrier

Features

  • LD-MOSFET-technology
  • Over voltage protection and reverse polarity protection
  • Milled aluminium case
  • ON / OFF control with DC voltage

Applications

  • Analog transmission systems
  • Measurement, Laboratory equipment
  • EMC-measurement
  • Jammer

Options

  • Amplifier mounted on heat sink with fans
  • Amplifier installed into 19" rackmount case

Accessories

You will find further information for dimensioning heat sinks under the rubric heat sinks.

1) Dimensioned for 25 °C ambient temperature

 

Important note

  • Amplifier does not contain coaxial relais!

Save product

- Specifications subject to change without notice -