KU PA 710 A

Power Amplifier

770 ... 880 MHz • 30 W

The power amplifier is developed both for digital and analog transmission systems. It's frequency range is chosen to cover the new UHF frequencies for the cellular phone network completely. By the use of LD-MOSFET-technology high efficiency and low current consumption are reached at the same time.

Preliminary data

Specifications

Type

KU PA 710 A

Frequency range

770 ... 880 MHz

Maximum input power

40 mW

Output power P1dB

min. 20 W (CW)

Saturation power

min. 30 W (CW)

Output power COFDM @ 2 % EVM  1)   

min. 6 W, typ. 10 W

Gain

min. 30 dB

Gain flatness

typ. +/- 2.5 dB

Monitor output

DC voltage, uncalibrated

Efficiency @ 30 W output

typ. 50 %

Harmonic rejection @ 30 W output

min. 30 dB

Intermodulation distortions

IM3 @ 10 W PEP

typ. -42 dBc

Supply voltage

+28 V DC

ON voltage

+9 ... 14 V DC

Input return loss (S11)

min. 12 dB

Maximum load VSWR

1.8:1

Maximum case temperature

+55 °C

Quiescent current

typ. 400 mA

Current consumption

max. 2.7 A

Input connector / impedance

SMA-female, 50 ohms

Output connector / imepdance

SMA-female, 50 ohms

Case

milled aluminium

Dimensions (mm)

130 x 59 x 20

Weight

typ. 235 g

1) measured with QAM64/8MSps, single carrier

Features

  • LD-MOSFET-technology
  • Over voltage protection and reverse polarity protection
  • Monitor output for forward power detection (DC voltage)
  • Milled aluminium case

Applications

  • Mobile communication
  • COFDM – systems with modulation QPSK, QAM
  • Analog transmission systems

Options

  • Amplifier mounted on heat sink with fans

Accessories

You will find further information for dimensioning heat sinks under the rubric heat sinks.

1) Dimensioned for 25 °C ambient temperature

 

Important note

  • Amplifier does not contain coaxial relais!

Save product

- Specifications subject to change without notice -