KU PA 5358 AL

Power Amplifier

5300 ... 5800 MHz • 3.5 W

The new power amplifier KU PA 5358 AL features best performance for digital applications in the 5.6 GHz range. It achieves an EVM of typ. 1.2 % @ 0.5 W average output power and an EVM lower than 2.2 % @ 1 W average output power over the complete frequency band from 5300 to 5800 MHz (measured with single-carrier, 64-QAM, 6 Msps). The power amplifier has excellent rejection of spurious and harmonic signals. Many protection and monitoring features allow easy and reliable handling.

Dimensions as PDF

Specifications
Type	KU PA 5358 AL
Frequency range	5300 ... 5800 MHz
Input power	typ. 2 mW, max. 5 mW
Output power P1dB	typ. 3.5 W
Saturation power	min. 4 W
Gain	typ. 34 dB
Harmonic rejection	min. 60 dB
ON voltage	+5 ... 14 V DC (ON)
VSWR protection	isolator
Maximum case temperature	+55 °C
Supply voltage	+12 ... 14 V DC
Current consumption	max. 2.5 A
Quiescent current	typ. 2.1 A
Input connector / impedance	SMA-female, 50 ohms
Output connector / impedance	SMA-female, 50 ohms
Case	milled aluminium
Dimensions (mm)	158 x 59 x 20
Weight	typ. 320 g

Features

GaAs FET technology
High linearity
Low EVM
Isolator for protection against high VSWR
Adjustable ALC (automatic level control)
Over voltage protection and reverse polarity protection
Over temperature protection
Monitor outputs for forward and reverse power detection (DC voltage)
Logic ON / OFF control (ON at +5 … 14 V DC)

Applications

Digital transmission and broadcast systems (DVB, WiMAX)
COFDM systems using QPSK, QAM
Analog transmission systems

Options

Amplifier mounted on heat sink with fans
Other frequencies on request!

Accessories

Recommended power supply: S 150 W 12
Recommended heat sink: SK 200 - 80 1)
Recommended fan: FAN 80x80 12 V 1)

You will find further information for dimensioning heat sinks under the rubric heat sinks.

1) Dimensioned for 25 °C ambient temperature

Important note

Module does not contain coaxial relay!

Save product

- Specifications subject to change without notice -