KU PA 2345 A
Linear MOSFET Power Amplifier
2300 ... 2500 MHz • 40 W
This new power amplifier using LD-MOSFET technology provides high linearity and high efficiency (up to 50 %). Since the amplifier is thermally very stable and highly linear, it can be used for all operating modes. Typical applications are DAB / COFDM / QPSK / DATV / DVB-S / DVB-T.
| Specifications | |
| Type | KU PA 2345 A |
| Frequency range | 2300 ... 2500 MHz |
| Input power | typ. 1.6 W, max. 3 W |
| Output power P1dB | min. 40 W |
| Saturation power | typ. 50 W |
| Output power COFDM | max. 10 W |
| Small signal gain | typ. 14 dB, min. 13 dB |
| Gain flatness | max. +/- 1 dB |
| Harmonic rejection | 23 dB @ 45 W |
| IM3 @ 45 W PEP | min. -38 dBc |
| Efficiency | typ. 40% @ 45 W |
| Input return loss (S11) | min. 8 dB |
| VSWR of load | max. 1.8:1 |
| Maximum case temperature | +55 °C |
| Supply voltage | +28 V DC |
| Current consumption | typ. 4 A @ 40 W max. 4.5 A |
| Quiescent current | typ. 700 mA |
| Input connector / impedance | SMA-female, 50 ohms |
| Output connector / impedance | SMA-female, 50 ohms |
| Case | milled aluminium |
| Dimensions (mm) | 80 x 60 x 20 |
| Weight | typ. 145 g |
Features
- LD MOSFET technology
- Over voltage protection and reverse polarity protection
- Monitor output for forward power detection (DC voltage)
Applications
- Digital broadcast systems (DAB, DVB)
- COFDM systems using modulation types QPSK, QAM
- Analog transmission systems
Options

- Amplifier mounted on heat sink with fans
- Amplifier installed into 19" rackmount case
Accessories
- Recommended power supply: SP 150 W 27
- Recommended heat sink: SK 200 - 80 1)
- Recommended fan: FAN 80x80 24 V 1)
- Thermal cut-out thermostat TS-65/10
You will find further information for dimensioning heat sinks under the rubric heat sinks.
1) Dimensioned for 25 °C ambient temperature
Important note
- Module does not contain coaxial relay!
- Specifications subject to change without notice -




