KU PA 2327 AL
Power Amplifier for the S-Band
2300 ... 2700 MHz • 4 W
| Specifications | |
| Type | KU PA 2327 AL |
| Frequency range | 2300 ... 2700 MHz |
| Input power | typ. 1 mW |
| Output power | min. 4 W |
| Saturation power | typ. 5 W |
| Gain | typ. 39 dB |
| Gain flatness | +/- 1 dB |
| IM3 @ 1 W PEP | typ. -50 dBc |
| VSWR of load | max. 1.8:1 |
| VSWR protection | isolator |
| Maximum case temperature | +55 °C |
| Supply voltage | +11 ... 14 V DC |
| Current consumption | typ. 1.6 A |
| Input connector / impedance | SMA-female, 50 ohms |
| Output connector / impedance | SMA-female, 50 ohms |
| Case | milled aluminium |
| Dimensions (mm) | 158 x 59 x 20 |
| Weight | typ. 300 g |
Block diagram
Frequency response (diagram)
Features
- GaAs FET technology
- High linearity (class A operation)
- Good harmonic rejection
- Isolator for protection against high VSWR
- Over voltage protection and reverse polarity protection
- Monitor outputs for forward and reverse power detection (DC voltage)
- Adjustable ALC (automatic level control)
Applications
- Multichannel Multipoint Distribution Service (MMDS)
- Digital broadcast systems (DVB-T, DVB-S)
- COFDM systems using modulation types QPSK, QAM
- Analog transmission systems
Options
- Amplifier mounted on heat sink with fans
Accessories
- Recommended heat sink: SK 200 - 80 1)
- Recommended fan: FAN 80x80 12 V 1)
You will find further information for dimensioning heat sinks under the rubric heat sinks.
1) Dimensioned for 25 °C ambient temperature
Important note
- Amplifier does not contain coaxial relais!
- Specifications subject to change without notice -
